{"id":2125,"date":"2011-03-27T22:21:18","date_gmt":"2011-03-28T02:21:18","guid":{"rendered":"http:\/\/vapingguides.com\/blog\/?page_id=2125"},"modified":"2012-10-05T16:46:14","modified_gmt":"2012-10-05T20:46:14","slug":"the-new-e-power-from-madvapes","status":"publish","type":"page","link":"http:\/\/vapingguides.com\/blog\/breaking-news\/the-new-e-power-from-madvapes\/","title":{"rendered":"The New E-Power From MadVapes"},"content":{"rendered":"

The new e-Power electronic cigarette by Smok Tech is an interesting addition to the wide variety of personal vaporizers (PVs) and accessories that MadVapes<\/a> has become known for. \u00a0On the outside it looks like a slightly beefier version of an eGo, the PV that has taken the market by storm lately. \u00a0The difference is in the battery, and unlike the eGo, you can actually get inside and take a look at that battery.<\/p>\n

A mod by any other name<\/strong><\/p>\n

Most factory manufactured kits are sold with a sealed housing that contains the battery, switch and circuitry. \u00a0We have come to refer to these as ecig batteries, but the battery itself is actually a simple wrapped cell inside of that housing. \u00a0Not so with the e-Power. \u00a0The batteries in this PV are inexpensive and easily replaceable 1050mAh 14650 cells. \u00a0Charging is accomplished by unscrewing the battery tube and removing the battery, which is then placed on the included charger. \u00a0A second 14650 that is included with the kit can then be placed in the tube. \u00a0The tube is vented at the end for safety.<\/p>\n

\"\"<\/a>

Removing the battery<\/p><\/div>\n

\"\"<\/a>

Safety vent<\/p><\/div>\n

This process will sound pretty familiar to anyone who has used a mod. \u00a0It’s fitting that MadVapes<\/a>, a company known for their wide variety of mod parts, kits and complete personal vaporizer mods, should be making this product available. \u00a0The e-Power is essentially a mod that looks like an eGo, which is a popular design, so this is likely a good thing.<\/p>\n

Not your normal Mod Switch<\/strong><\/p>\n

Where the e-Power differs from a typical mod is in the switch. \u00a0Rather than a simple momentary switch that is common to all but the advanced mods, the e-Power incorporates a control circuit. \u00a0Testing indicates that this circuit regulates the output to 3.7V and also allows the lighted switch to blink when the battery is depleted. \u00a0Mine actually stayed on constantly when the battery reached it’s limit, but the effect is the same. \u00a0These are welcome features in a mod, as batteries that are getting low in a typical mod will continue to work for awhile, but provide a less than satisfactory vape. \u00a0These features should be especially appreciated by new vapers. \u00a0The switch is also replaceable and it will be interesting to see what that component is sold for.<\/p>\n

The kit<\/strong><\/p>\n

Also unlike the typical mod, the e-Power comes packaged in an attractive box similar to most other electronic cigarettes. \u00a0I don’t have anything against receiving just a cardboard box with a tube and some batteries, but the completeness of this presentation makes this kit just a bit more attractive to a new user. \u00a0The first layer in the box houses an \u00a0assembled e-Power, complete with a switch protector, and a second battery. \u00a0The battery charger, five 24mg Marlboro flavored cartridges and a manual are found on the second layer. \u00a0It’s ready to go out right out of the box, but putting a full charge on the batteries before using will yield the best results.<\/p>\n

\"\"<\/a>

Boxed kit<\/p><\/div>\n

\"\"<\/a>

Kit contents<\/p><\/div>\n

The design<\/p>\n

As mentioned before, the obvious design target was the eGo and MadVapes<\/a> and Smok Tech have hit it. \u00a0From a distance, the e-Power looks very similar, with its cone over the atomizer and bright band in the middle. \u00a0Closer inspection reveals a slightly larger and heavier PV. \u00a0The e-Power is 99mm long and 17mm wide, compared to the 650mAh eGo’s 71mm and 14mm measurements. \u00a0e-Power and eGo cones and batteries are not interchangeable, but the unit does use the ubiquitous 510 fitting, so a wide variety of atomizers and cartomizers can be used. \u00a0This is still a comfortable PV to hold and carry. \u00a0In length and weight it is actually much closer to the 1000mAH eGo, which it should closely approximate in battery life as well.<\/p>\n

\"\"<\/a><\/p>\n

Fit and finish are good. \u00a0Everything screws together nicely and there are no rattles or loose components. \u00a0The bright portion in the middle has a slightly cheap feel to it, but the coating on the rest of the unit is good. \u00a0The cone is slightly longer than an eGo cone, meaning that it extends slightly beyond the atomizer. \u00a0This has no effect when using cartridges or longer drip tips, but shorter drip tips end up a little too close to the cone. \u00a0Regular sized cartomizers will be much more comfortable with a drip tip when using the cone.<\/p>\n

\"\"<\/a>

Cone over atomizer<\/p><\/div>\n

\"\"<\/a>

Cone with short drip tip<\/p><\/div>\n

Price<\/p>\n

At $45.99, the e-Power is attractively priced for a complete kit. \u00a0Falling midway between the lowest Riva prices available and the higher eGo prices, it represents a good value. \u00a0That value increases quite a bit when the cost of replacement batteries is considered. \u00a0Stocking up on a couple of extra 14650s only costs $6.49 apiece, a bargain compared to buying extra eGo batteries.<\/p>\n

Results<\/strong><\/p>\n

After using the e-Power for a couple of days, I think MadVapes<\/a> has a viable contender in the ecig kit marketplace. \u00a0I’ve easily gotten a day of heavy vaping out of one battery and the vape at 3.7V has been good with either the included regular atomizer or a low resistance one. \u00a0Carrying a couple of extra batteries is convenient due to their smaller size and low cost. \u00a0And it looks good, too. \u00a0The e-Power should definitely find itself on the list of inexpensive PV alternatives. \u00a0This mod will be right along side the other cone wearers that it’s dressed up as.<\/p>\n","protected":false},"excerpt":{"rendered":"

The new e-Power electronic cigarette by Smok Tech is an interesting addition to the wide variety of personal vaporizers (PVs) and accessories that MadVapes has become known for. \u00a0On the outside it looks like a slightly beefier version of an eGo, the PV that has taken the market by storm lately. \u00a0The difference is in […]<\/p>\n","protected":false},"author":3,"featured_media":0,"parent":1174,"menu_order":0,"comment_status":"open","ping_status":"open","template":"","meta":{"footnotes":""},"_links":{"self":[{"href":"http:\/\/vapingguides.com\/blog\/wp-json\/wp\/v2\/pages\/2125"}],"collection":[{"href":"http:\/\/vapingguides.com\/blog\/wp-json\/wp\/v2\/pages"}],"about":[{"href":"http:\/\/vapingguides.com\/blog\/wp-json\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"http:\/\/vapingguides.com\/blog\/wp-json\/wp\/v2\/users\/3"}],"replies":[{"embeddable":true,"href":"http:\/\/vapingguides.com\/blog\/wp-json\/wp\/v2\/comments?post=2125"}],"version-history":[{"count":8,"href":"http:\/\/vapingguides.com\/blog\/wp-json\/wp\/v2\/pages\/2125\/revisions"}],"predecessor-version":[{"id":3831,"href":"http:\/\/vapingguides.com\/blog\/wp-json\/wp\/v2\/pages\/2125\/revisions\/3831"}],"up":[{"embeddable":true,"href":"http:\/\/vapingguides.com\/blog\/wp-json\/wp\/v2\/pages\/1174"}],"wp:attachment":[{"href":"http:\/\/vapingguides.com\/blog\/wp-json\/wp\/v2\/media?parent=2125"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}