{"id":4384,"date":"2013-05-16T14:38:26","date_gmt":"2013-05-16T18:38:26","guid":{"rendered":"http:\/\/vapingguides.com\/blog\/?page_id=4384"},"modified":"2013-05-16T16:29:43","modified_gmt":"2013-05-16T20:29:43","slug":"terminator-rda-tank-from-smok-tech","status":"publish","type":"page","link":"http:\/\/vapingguides.com\/blog\/breaking-news\/terminator-rda-tank-from-smok-tech\/","title":{"rendered":"Terminator RDA Tank from Smok Tech"},"content":{"rendered":"

\"Terminator<\/a>I never thought I’d miss a good set of translated Chinese directions, but never is a long time. \u00a0The new Terminator RDA Tank from Smok Tech requires a little bit of experimentation to get working correctly, something that could easily be resolved with a simple manual. \u00a0Once setup it works well, but has some serious flaws.<\/p>\n

The Terminator is essentially a rebuildable dripping atomizer (RDA) surrounded by a small tank. \u00a0It looks a lot like a cartomizer tank with bulge in the middle of the cartomizer. \u00a0That bulge actually surrounds an atomizer and ceramic bowl and comes apart for access and rebuilding. \u00a0Unscrewing the two parts of the housing also serve to vary the e-liquid feed to the coil.<\/p>\n

\"Terminator<\/a><\/p>\n

Why an atomizer instead of a cartomizer? \u00a0The most important reason is flavor. \u00a0Many vapers find an atomizer produces much better flavor than the sometimes muted taste of a cartomizer. \u00a0The second reason is that an atomizer can be used by dripping a few drops of liquid directly on the coil, ensuring the best hit every time. \u00a0The Terminator RDA Tank succeeds nicely in both of these areas, allowing direct dripping and producing excellent flavor and clouds of vapor. \u00a0It’s a very good rebuildable atomizer for the price.<\/p>\n

The tank should make it even more attractive, but here is where the Terminator is a big disappointment. \u00a0The tank is a simple poly tube with metal caps on each end. \u00a0O-rings seal the connection between the caps and the tank and between the cartomizer and caps. \u00a0The design is much like cartomizer tanks we’ve used in the past with good results, but caps on this one seem exceptionally loose. \u00a0Everything slides around way to much to inspire much confidence in the liquid staying where it’s supposed to be.<\/p>\n

\"Terminator<\/a><\/p>\n

The bulb in the middle prevents the atomizer tube from being pulled down enough, so the top cap needs to be removed to do so. \u00a0Removing it without making a mess is somewhat difficult. \u00a0Pulling on the top cap can easily pull the tube off of the bottom cap, which catches on the bulb. \u00a0Placing the cap back onto the filled tank is also problematic, as the bottom cap can easily be pushed right off the end of the atomizer tube. \u00a0Pushing the cap on over the atomizer also creates a lot of pressure in the tank, thus flooding the atomizer. \u00a0Some users report that pushing the cap on just enough to make contact and then inverting the tank while pressing it on further helps.<\/p>\n

Loose caps also mean that once everything is put back together, there is quite a bit of wiggle when attached to a device. \u00a0Part of that may also be due to the fact that it must be screwed on using the top of the atomizer tube that sticks out because the tank will simply spin on the atomizer if try to tighten it with that. \u00a0The problem is that turning the top of the atomizer also results in closing the threaded gap in the middle of the tube which controls juice flow to the coil. \u00a0That threading in the middle, which must be loose to allow juice flow, also allows for some flexibility that would not be apparent in a single piece cartomizer.<\/p>\n

\"Terminator<\/a><\/p>\n

The flow control is a good idea, but poorly executed in this tank. \u00a0The two pieces of the atomizer come securely screwed together and there is no indication of how the flow control is supposed to be used. \u00a0Unscrewing the two halves of the atomizer expose slots in either side that become larger as it is unscrewed, thus allowing liquid to enter the coil area easier. \u00a0It works quite well except for the fact that attaching and detaching the Terminator from a battery invariably changes the flow. \u00a0The lack of any instructions regarding it is simply inexcusable and would certainly result in a very poor experience for a relatively new vaper.<\/p>\n

Conclusion<\/strong><\/p>\n

Getting Terminator RDA Tank\u00a0all set up can be a frustrating exercise and once in use it feels fragile. \u00a0I would not even consider putting this is pocket for fear of things coming apart. \u00a0The tank feed to the atomizer is useful when it’s working properly, but the difficulty of filling probably make it more trouble than it’s worth. \u00a0On the other hand, the Terminator does deliver a great vape from a small and reasonably priced atomizer. \u00a0I may end up getting quite a lot of use out of this without the tank. \u00a0At $11.99 from Madvapes<\/a>, it’s actually not too bad of a deal even if that’s all it gets used for. \u00a0Second versions often resolve glaring issues, so here’s hoping.<\/p>\n","protected":false},"excerpt":{"rendered":"

I never thought I’d miss a good set of translated Chinese directions, but never is a long time. \u00a0The new Terminator RDA Tank from Smok Tech requires a little bit of experimentation to get working correctly, something that could easily be resolved with a simple manual. \u00a0Once setup it works well, but has some serious […]<\/p>\n","protected":false},"author":3,"featured_media":0,"parent":1174,"menu_order":0,"comment_status":"open","ping_status":"open","template":"","meta":{"footnotes":""},"_links":{"self":[{"href":"http:\/\/vapingguides.com\/blog\/wp-json\/wp\/v2\/pages\/4384"}],"collection":[{"href":"http:\/\/vapingguides.com\/blog\/wp-json\/wp\/v2\/pages"}],"about":[{"href":"http:\/\/vapingguides.com\/blog\/wp-json\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"http:\/\/vapingguides.com\/blog\/wp-json\/wp\/v2\/users\/3"}],"replies":[{"embeddable":true,"href":"http:\/\/vapingguides.com\/blog\/wp-json\/wp\/v2\/comments?post=4384"}],"version-history":[{"count":13,"href":"http:\/\/vapingguides.com\/blog\/wp-json\/wp\/v2\/pages\/4384\/revisions"}],"predecessor-version":[{"id":4404,"href":"http:\/\/vapingguides.com\/blog\/wp-json\/wp\/v2\/pages\/4384\/revisions\/4404"}],"up":[{"embeddable":true,"href":"http:\/\/vapingguides.com\/blog\/wp-json\/wp\/v2\/pages\/1174"}],"wp:attachment":[{"href":"http:\/\/vapingguides.com\/blog\/wp-json\/wp\/v2\/media?parent=4384"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}